Template/Pattern Bits
2 flute American Made carbide tipped flush trim pattern or template router bits provide clean routed surface edges. Available in both 1/4" and 1/2" shanks up to 1-1/8" diamter. Note, the bearing on the 1/2" shank 3/4" diameter bit is delicate to step up to the 1-1/8" diameter bit if you can or be careful not to overheat the bearing.
All of our router bits are Made in USA by the award winning Whiteside Machine in their North Carolina factory.
| Part Number | Cutting Diameter | Cutting Length | Overall Length | Bearing Number |
| 1/4" Shank | ||||
| *3000A | 1/2" | 1/8" | 1-3/4" | B9 |
| *3000 | 1/2" | 1/4" | 1-7/8" | B9 |
| 3001 | 1/2" | 1/2" | 2" | B9 |
| 3002 | 1/2" | 3/4" | 2-1/4" | B9 |
| 3004 | 1/2" | 1" | 2-1/2" | B9 |
| *3006 | 5/8" | 1/4" | 1-3/4" | B6 |
| **K41 | 5/8" | 1/2" | 2-1/4" | B6 |
| **K43 | 5/8" | 3/4" | 2-1/2" | B6 |
| 3008 | 5/8" | 1" | 2-1/2" | B6 |
| 3010 | 3/4" | 1/4" | 1-3/4" | B4 |
| 3012 | 3/4" | 3/4" | 2-3/8" | B4 |
| 3014 | 3/4" | 1" | 2-5/8" | B4 |
| 3/8" Shank | ||||
| 3015 | 7/8" | 1" | 2-5/8" | B12 |
| 1/2" Shank | ||||
| 3016 | 1-1/8" | 1" | 3" | B11 |
| 3018 | 1-1/8" | 1-1/2" | 3-1/2" | B11 |
| 3019 | 1-1/8" | 2" | 4" | B11 |
| 3020 | 3/4" | 1" | 2-3/4" | B19 |
| 3021 | 3/4" | 1-1/4" | 3" | B19 |
| 3022 | 3/4" | 1-1/2" | 3-1/4" | B19 |
| 3022A | 7/8" | 1-1/2" | 3-1/2" | B13 |
| 3023 | 3/4" | 2" | 3-5/8" | B19 |
